M&M AG
SALES/SERVICE
TAPPEN, ND
M&M AG
SALES/SERVICE
TAPPEN, ND
* Ground opening lid
* 16” tires
* Heavy duty frame for extended life
* One 8000lb jack-no additional stands or jacks needed
* 3 height adjustment settings on creep panels
* All Seams Welded
* Heavy Duty Creep Panels and Axle
* Adjustable Creep Bar
* Winch up panels for 250 models
* Ground Level Lid Opening - no need to crawl on feeder
* One 8000lb Jack - no additional stands or jacks needed
* Fill With Panels Up
* Rounded Corners for Safety
* Full Sub-frame
* 16” tires
* All Seams Welded
* The 360 Hinge allows your gate to swing either direction and flat against either side of your panel.
* Use temporarily in a space or leave them permanently.
* Each panel comes with its own set of legs and hinge sockets on each end for the addition of our gates.
* Each have double chain connection and 3/16" chain latch for a positive connection.
* Bars are made of 2 7/8 pipe and are spaced 9" apart.
* Square tube uprights provide vertical support.
* Square legs and sockets keep legs inline.
* Each Corral Panel comes with it's own set of adjustable legs for use on uneven ground.
* Leg sockets and stands are square tubing to eliminate legs turning under panel.
* Standard Extra Large 17" Trough
* Ground Level Lid Opening
* Adjustable Feed Gates
* Standard Long Eaves
* Heavy Duty Skids
* Built to withstand the abuse from cattle and the weather.
* Can be stacked for storage and are easily moved in cold, frozen weather.
* Frame is 2 3/8 pipe and the sheeting is 14ga. steel.
* Built wider on the bottom for less waste, easier clean-up, stacking and storing.
* This unit can be painted or unpainted.
* Covered welds
* Handles abuse
* Helps put that extra weight on your calves.
* The entry bar allows for 3 different entry height settings. This Calf Feeder Pen is available in a variety of sizes: 8' x 8' or 8' x 16' or 12' x 12'.
* Available as individual panels for use to keep cows out of an area but let the calves go through.
* Can also use calving pen for a maternity tub, AI use, crowding cows/calves and a sick animal pen.
* Fully Sheeted
* Curved Side for Crowding
* Removable Corner Post
* Side and Back Doors
* Split Crowding Gates
* Heavy Duty 1650lbs
* Head Gate Mount
* Crowd Gate Locks Automatically
* Standing Steel Floor Plate
* Portable or Folding options available (See Below)
* Nursing gates now standard on both sides of the cow!
* Curved side for easy crowding
* Folds down into a 3' x 11' area. The Folding Calving Pen was built to save on shipping space and costs. It has evolved into a favorite product for Ranchers too. You can take the Folding Calving Pen and slide it into your barn without having to take down any stalls to install it. Slide it in, unfold it and use it just like the standard Calving Pen.
* Excellent way to keep flies and insects off of your cattle.
* Use it year round by bringing it into your yards and the cattle will use it for scratching instead of your fences.
* We also offer a containment unit for your insecticides. By using the containment tank, you will only have to fill weekly instead of going out and wetting your sock everyday.
* Built tough enough for Buffalo use and will last you for years to come.
* Each Cattle Rub has high and low sock connecting points for cattle and calf usage.
* All Cattle Rubs are built on skids with tow hooks for easy moving.
* Can be stacked for transportation.
* Saves you time! Fill it weekly and it will drip into your sock keeping it moist rather than going out and having to wet the sock daily. Cut a small hole in the sock for the hose to stick in, set your valve to your desired drip speed, fill your tank and you are done. So much easier than having to re-wet your whole sock every time.
* Coupler & Ball Hitch
* 12 Ga Sheeting Thickness
* Corner Drains
* Reduce Waste
* Long lasting product
* Serves as a Fence and Feeder Bunk
* Elevated by 5"
* 14 Ga trough
* Variable neck bar height
* Low trough height (great for cattle & calves)
* Quick installation to ground
* Heavy Duty
* Long lasting product
* Serves as a Fence and Feeder
* Customizable Lengths
* Variable neck bar height
* Quick installation
* Heavy Duty
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
Contact Wayne at (701) 327-8157 or (701) 471-8799 for more information.
Contact Wayne at (701) 327-8157 or (701) 471-8799 for more information.
* Heavy Duty Feed Bunks with a triple weld center splice
* Designed with a flat bottom and sloped sides
* Water drain holes on both ends
* Fill capacity of 55 cubic feet in standard bunk
* Outside mounted legs allow for stacking bunks
* Legs are strong and made with 3/16 4x6 rectangular tubing
* These can be painted or unpainted
* Stackable for easy storage
* Easily moved in cold, frozen weather
* Option to go 42" wide x 15" deep on Grain Troughs
* Easily assembled to Calving Pen with 2 bolts
* Self-catching with forward release
* Use right or left handed
* Straight bars eliminate choking
* All hinge points have grease zerks
Contact Wayne at (701) 327-8157 or (701) 471-8799 for more information.
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
* Reduces hay lose & lasts longer
* Designed to Protect Manes on Horses
* Sides raised for Smoother Transportation
* Heavy Duty
* Easily transported by a single person
* Used for rounding up cattle and temporary fencing
* Legs include mud bars per panel
* A loading chute needs to be user and animal friendly. That is why we use the step floor for a ramp and include the catwalk on all loading chutes.
* All models feature a steel step design with added traction bars, fully sheeted sides, catwalk and lower gate.
* Side trucker door
* Many options that you can choose from: Portable or stationary, with or without side load for stock trailers, with or without top platform. We can build you what you want and we won't skimp on materials in the process.
* We can custom build a loading chute to your specifications for your cattle business.
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
* Reduces hay lose
* Protects Manes on Horses
* Sides raised for Smoother Transportation
* Heavy Duty
* Portable or permanent setup
* Customizable
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
* Reduces hay lose & lasts longer
* Designed to protect Manes on Horses
* Sides raised for Smoother Transportation
* Heavy Duty
* Can be ordered with or without steel panels
* Can be combined to create shade, wind protection and/or shelters
* Heavy Duty Windbreak Panels built to last
* Legs are made of 2 3/8 pipe and are 10’ long
* Frame made up of 2 7/8 pipe.
* 22g Super Steel panels
* Ground opening lid
* 16” tires
* Heavy duty frame for extended life
* One 8000lb jack-no additional stands or jacks needed
* 3 height adjustment settings on creep panels
* All Seams Welded
* Heavy Duty Creep Panels and Axle
* Adjustable Creep Bar
* Winch up panels for 250 models
* Ground Level Lid Opening - no need to crawl on feeder
* One 8000lb Jack - no additional stands or jacks needed
* Fill With Panels Up
* Rounded Corners for Safety
* Full Sub-frame
* 16” tires
* All Seams Welded
* The 360 Hinge allows your gate to swing either direction and flat against either side of your panel.
* Use temporarily in a space or leave them permanently.
* Each panel comes with its own set of legs and hinge sockets on each end for the addition of our gates.
* Each have double chain connection and 3/16" chain latch for a positive connection.
* Bars are made of 2 7/8 pipe and are spaced 9" apart.
* Square tube uprights provide vertical support.
* Square legs and sockets keep legs inline.
* Each Corral Panel comes with it's own set of adjustable legs for use on uneven ground.
* Leg sockets and stands are square tubing to eliminate legs turning under panel.
* Standard Extra Large 17" Trough
* Ground Level Lid Opening
* Adjustable Feed Gates
* Standard Long Eaves
* Heavy Duty Skids
* Built to withstand the abuse from cattle and the weather.
* Can be stacked for storage and are easily moved in cold, frozen weather.
* Frame is 2 3/8 pipe and the sheeting is 14ga. steel.
* Built wider on the bottom for less waste, easier clean-up, stacking and storing.
* This unit can be painted or unpainted.
* Covered welds
* Handles abuse
* Helps put that extra weight on your calves.
* The entry bar allows for 3 different entry height settings. This Calf Feeder Pen is available in a variety of sizes: 8' x 8' or 8' x 16' or 12' x 12'.
* Available as individual panels for use to keep cows out of an area but let the calves go through.
* Can also use calving pen for a maternity tub, AI use, crowding cows/calves and a sick animal pen.
* Fully Sheeted
* Curved Side for Crowding
* Removable Corner Post
* Side and Back Doors
* Split Crowding Gates
* Heavy Duty 1650lbs
* Head Gate Mount
* Crowd Gate Locks Automatically
* Standing Steel Floor Plate
* Portable or Folding options available (See Below)
* Nursing gates now standard on both sides of the cow!
* Curved side for easy crowding
* Folds down into a 3' x 11' area. The Folding Calving Pen was built to save on shipping space and costs. It has evolved into a favorite product for Ranchers too. You can take the Folding Calving Pen and slide it into your barn without having to take down any stalls to install it. Slide it in, unfold it and use it just like the standard Calving Pen.
* Excellent way to keep flies and insects off of your cattle.
* Use it year round by bringing it into your yards and the cattle will use it for scratching instead of your fences.
* We also offer a containment unit for your insecticides. By using the containment tank, you will only have to fill weekly instead of going out and wetting your sock everyday.
* Built tough enough for Buffalo use and will last you for years to come.
* Each Cattle Rub has high and low sock connecting points for cattle and calf usage.
* All Cattle Rubs are built on skids with tow hooks for easy moving.
* Can be stacked for transportation.
* Saves you time! Fill it weekly and it will drip into your sock keeping it moist rather than going out and having to wet the sock daily. Cut a small hole in the sock for the hose to stick in, set your valve to your desired drip speed, fill your tank and you are done. So much easier than having to re-wet your whole sock every time.
* Coupler & Ball Hitch
* 12 Ga Sheeting Thickness
* Corner Drains
* Reduce Waste
* Long lasting product
* Serves as a Fence and Feeder Bunk
* Elevated by 5"
* 14 Ga trough
* Variable neck bar height
* Low trough height (great for cattle & calves)
* Quick installation to ground
* Heavy Duty
* Long lasting product
* Serves as a Fence and Feeder
* Customizable Lengths
* Variable neck bar height
* Quick installation
* Heavy Duty
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
Contact Wayne at (701) 327-8157 or (701) 471-8799 for more information.
Contact Wayne at (701) 327-8157 or (701) 471-8799 for more information.
* Heavy Duty Feed Bunks with a triple weld center splice
* Designed with a flat bottom and sloped sides
* Water drain holes on both ends
* Fill capacity of 55 cubic feet in standard bunk
* Outside mounted legs allow for stacking bunks
* Legs are strong and made with 3/16 4x6 rectangular tubing
* These can be painted or unpainted
* Stackable for easy storage
* Easily moved in cold, frozen weather
* Option to go 42" wide x 15" deep on Grain Troughs
* Easily assembled to Calving Pen with 2 bolts
* Self-catching with forward release
* Use right or left handed
* Straight bars eliminate choking
* All hinge points have grease zerks
Contact Wayne at (701) 327-8157 or (701) 471-8799 for more information.
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
* Reduces hay lose & lasts longer
* Designed to Protect Manes on Horses
* Sides raised for Smoother Transportation
* Heavy Duty
* Easily transported by a single person
* Used for rounding up cattle and temporary fencing
* Legs include mud bars per panel
* A loading chute needs to be user and animal friendly. That is why we use the step floor for a ramp and include the catwalk on all loading chutes.
* All models feature a steel step design with added traction bars, fully sheeted sides, catwalk and lower gate.
* Side trucker door
* Many options that you can choose from: Portable or stationary, with or without side load for stock trailers, with or without top platform. We can build you what you want and we won't skimp on materials in the process.
* We can custom build a loading chute to your specifications for your cattle business.
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
* Reduces hay lose
* Protects Manes on Horses
* Sides raised for Smoother Transportation
* Heavy Duty
* Portable or permanent setup
* Customizable
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
* Reduces hay lose & lasts longer
* Designed to protect Manes on Horses
* Sides raised for Smoother Transportation
* Heavy Duty
* Can be ordered with or without steel panels
* Can be combined to create shade, wind protection and/or shelters
* Heavy Duty Windbreak Panels built to last
* Legs are made of 2 3/8 pipe and are 10’ long
* Frame made up of 2 7/8 pipe.
* 22g Super Steel panels
* Ground opening lid
* 16” tires
* Heavy duty frame for extended life
* One 8000lb jack-no additional stands or jacks needed
* 3 height adjustment settings on creep panels
* All Seams Welded
* Heavy Duty Creep Panels and Axle
* Adjustable Creep Bar
* Winch up panels for 250 models
* Ground Level Lid Opening - no need to crawl on feeder
* One 8000lb Jack - no additional stands or jacks needed
* Fill With Panels Up
* Rounded Corners for Safety
* Full Sub-frame
* 16” tires
* All Seams Welded
* The 360 Hinge allows your gate to swing either direction and flat against either side of your panel.
* Use temporarily in a space or leave them permanently.
* Each panel comes with its own set of legs and hinge sockets on each end for the addition of our gates.
* Each have double chain connection and 3/16" chain latch for a positive connection.
* Bars are made of 2 7/8 pipe and are spaced 9" apart.
* Square tube uprights provide vertical support.
* Square legs and sockets keep legs inline.
* Each Corral Panel comes with it's own set of adjustable legs for use on uneven ground.
* Leg sockets and stands are square tubing to eliminate legs turning under panel.
* Standard Extra Large 17" Trough
* Ground Level Lid Opening
* Adjustable Feed Gates
* Standard Long Eaves
* Heavy Duty Skids
* Built to withstand the abuse from cattle and the weather.
* Can be stacked for storage and are easily moved in cold, frozen weather.
* Frame is 2 3/8 pipe and the sheeting is 14ga. steel.
* Built wider on the bottom for less waste, easier clean-up, stacking and storing.
* This unit can be painted or unpainted.
* Covered welds
* Handles abuse
* Helps put that extra weight on your calves.
* The entry bar allows for 3 different entry height settings. This Calf Feeder Pen is available in a variety of sizes: 8' x 8' or 8' x 16' or 12' x 12'.
* Available as individual panels for use to keep cows out of an area but let the calves go through.
* Can also use calving pen for a maternity tub, AI use, crowding cows/calves and a sick animal pen.
* Fully Sheeted
* Curved Side for Crowding
* Removable Corner Post
* Side and Back Doors
* Split Crowding Gates
* Heavy Duty 1650lbs
* Head Gate Mount
* Crowd Gate Locks Automatically
* Standing Steel Floor Plate
* Portable or Folding options available (See Below)
* Nursing gates now standard on both sides of the cow!
* Curved side for easy crowding
* Folds down into a 3' x 11' area. The Folding Calving Pen was built to save on shipping space and costs. It has evolved into a favorite product for Ranchers too. You can take the Folding Calving Pen and slide it into your barn without having to take down any stalls to install it. Slide it in, unfold it and use it just like the standard Calving Pen.
* Excellent way to keep flies and insects off of your cattle.
* Use it year round by bringing it into your yards and the cattle will use it for scratching instead of your fences.
* We also offer a containment unit for your insecticides. By using the containment tank, you will only have to fill weekly instead of going out and wetting your sock everyday.
* Built tough enough for Buffalo use and will last you for years to come.
* Each Cattle Rub has high and low sock connecting points for cattle and calf usage.
* All Cattle Rubs are built on skids with tow hooks for easy moving.
* Can be stacked for transportation.
* Saves you time! Fill it weekly and it will drip into your sock keeping it moist rather than going out and having to wet the sock daily. Cut a small hole in the sock for the hose to stick in, set your valve to your desired drip speed, fill your tank and you are done. So much easier than having to re-wet your whole sock every time.
* Coupler & Ball Hitch
* 12 Ga Sheeting Thickness
* Corner Drains
* Reduce Waste
* Long lasting product
* Serves as a Fence and Feeder Bunk
* Elevated by 5"
* 14 Ga trough
* Variable neck bar height
* Low trough height (great for cattle & calves)
* Quick installation to ground
* Heavy Duty
* Long lasting product
* Serves as a Fence and Feeder
* Customizable Lengths
* Variable neck bar height
* Quick installation
* Heavy Duty
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
Contact Wayne at (701) 327-8157 or (701) 471-8799 for more information.
Contact Wayne at (701) 327-8157 or (701) 471-8799 for more information.
* Heavy Duty Feed Bunks with a triple weld center splice
* Designed with a flat bottom and sloped sides
* Water drain holes on both ends
* Fill capacity of 55 cubic feet in standard bunk
* Outside mounted legs allow for stacking bunks
* Legs are strong and made with 3/16 4x6 rectangular tubing
* These can be painted or unpainted
* Stackable for easy storage
* Easily moved in cold, frozen weather
* Option to go 42" wide x 15" deep on Grain Troughs
* Easily assembled to Calving Pen with 2 bolts
* Self-catching with forward release
* Use right or left handed
* Straight bars eliminate choking
* All hinge points have grease zerks
Contact Wayne at (701) 327-8157 or (701) 471-8799 for more information.
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
* Reduces hay lose & lasts longer
* Designed to Protect Manes on Horses
* Sides raised for Smoother Transportation
* Heavy Duty
* Easily transported by a single person
* Used for rounding up cattle and temporary fencing
* Legs include mud bars per panel
* A loading chute needs to be user and animal friendly. That is why we use the step floor for a ramp and include the catwalk on all loading chutes.
* All models feature a steel step design with added traction bars, fully sheeted sides, catwalk and lower gate.
* Side trucker door
* Many options that you can choose from: Portable or stationary, with or without side load for stock trailers, with or without top platform. We can build you what you want and we won't skimp on materials in the process.
* We can custom build a loading chute to your specifications for your cattle business.
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
* Reduces hay lose
* Protects Manes on Horses
* Sides raised for Smoother Transportation
* Heavy Duty
* Portable or permanent setup
* Customizable
* Heavy Duty
* Sides raised for Smoother Transportation
* 21" Skirting
* Reduces hay lose & lasts longer
* Designed to protect Manes on Horses
* Sides raised for Smoother Transportation
* Heavy Duty
* Can be ordered with or without steel panels
* Can be combined to create shade, wind protection and/or shelters
* Heavy Duty Windbreak Panels built to last
* Legs are made of 2 3/8 pipe and are 10’ long
* Frame made up of 2 7/8 pipe.
* 22g Super Steel panels